Introduced in 1998, the LeanJet RB-1 immersion cleaning system processes a single basket of parts per cycle, up to ten (10) baskets per hour. Designed to fit into your work cell area or a smaller production environment, the Lean Jet RB-1 immersion cleaning systems clean using our patented parts washing and rinsing process of agitation, spray impingement, rotation, hydraulic purging through immersion, and heated blow-off drying. Our patented "triple action" batch cleaning process was developed specifically to process a broad range of challenging parts, especially those with internal bores and passages. In addition, the RB-1 is designed to be equipped with ultrasonics if needed. Totally enclosed self-ventilating process - operator is not exposed to vapors or mists found in other cleaning processes.
As a standard design this cell washer processes parts in the industry standard Kadon style basket designed to hold and protect your delicate parts during the entire cleaning process. Our carriage can be modified to accommodate your current baskets or new, custom fixtures.
The entire parts washer unit has been engineered and manufactured from the ground up to be flexible, durable, simple to use and easy to maintain.
|Cleaning Sequence:||Wash, Rinse & Dry|
|Part Orientation:||12” x 18” x 6” Basket or Custom Fixture|
|Production:||Up to 10 Cycles, 10 Baskets Per Hour (Fully Adjustable)|
|Max Work Envelope:||12” x 6” x 18” Long (Standard)|
|Method of Loading / Unloading:||Manual|
|Footprint:||5’-10” Deep, 3’-9” Wide, 5’-5” High|
|Cleaning Mechanisms:||Spray / Immersion / Turbulation / Ultrasonics / Rotation|
|Drying Mechanisms:||High Velocity, Heated Air with Rotation|
|Controls:||Programmable Controller & HMI Touch screen|