You are here

CTG News Blog

logo Blackstone-NEY Ultrasonics a world leader in providing  ultrasonic technology will introduce a host of advanced cleaning solutions at the MDM East 2015 in New York, New York June 9 - 11, 2015. Visitors to Blackstone-NEY Ultrasonics Booth #1660 will be introduced to a number of new products, technologies and services. Among the new technologies exhibited at the show will be: Megasonics  Multi-frequency system. The multiMEG's four mode operation (430 kHz conventional streaming megasonics / 430 kHz dualSWEEP® megasonics / 1.3 MHz conventional streaming megasonics / 1.3 MHz dualSWEEP® megasonics) delivers higher yields in a single process tank. Combining our multiMEG technology with our advanced plate arrays and submersible designs allows integrators and existing users the ability to experience higher particle removal efficiencies while minimizing downtime associated with full module replacement.. PROHT Sonic Tank also known as the “Benchtop Series” is an entry-level benchtop ultrasonic cleaning system made of all stainless steel construction. Available in various sizes and intended to sit easily on a workbench or as a drop-in, these parts washers offer the same cleaning capabilities as the more elaborate models but at a lower price. They are great for cleaning small parts on an intermittent to semi-production basis but are not recommended for high volume cleaning. These tanks are available for use with single or multi-frequency generators.

Ransohoff would like to congratulate Greg Allen on 5 years and Kevin Ochterski on 20 years of dedicated service.  CTG takes great pride in the quality of our workforce and it shows in CTG’s years of experience in the industry. Thank you for your continued support to the success of the CTG family. april 15 annv photo rns

CTG would like to congratulate all the employees from Ransohoff and Blackstone-NEY Ultrasonics who celebrated a birthday in April.

RNS April 2015 Bday Ransohoff April 2015 Birthdays

 

BNU April 2015 Bday Blackstone NEY Ultrasonics April 2015 Birthdays

 

Cleaning Technologies Group a world leader in providing cleaning and waste minimization technologies will introduce a host of advanced cleaning solutions at the Eastec 2015 in West Springfield, Massachusetts May 12 - 14, 2015. Visitors to Cleaning Technologies Group Booth #3350 will be introduced to a number of new products, technologies and services. Among the new technologies exhibited at the show will be: RB-1 G3The New LeanJet® RB-1 Cleaning System uses a patented washing and rinsing process of agitation, spray impingement, hydraulic purging through immersion and rotation, ultrasonics, and heated blow-off drying. The patented "triple action" batch cleaning process was developed specifically to process a broad range of challenging parts, especially those with internal bores and passages and complex geometries, making this system capable of meeting critical cleaning expectations. . The new RB-1 has many enhancements for easy maintenance such as larger access doors, larger tank access lids, bolt on air knife and more. The new LeanJet RB-1 Gen 3 parts washer also features the latest Siemens programmable controller and operator interface screen.

Cleaning Technologies Group a world leader in providing cleaning and waste minimization technologies will introduce a host of advanced cleaning solutions at the China International Machine Tool Show (CIMT) in Beijing, China April 20 - 25, 2015. Visitors to Cleaning Technologies Group Booth #W3-161 will be introduced to a number of new products, technologies and services. Among the new technologies exhibited at the show will be: 

  • The New Lean-Jet® RT-12 robotically tended cellular parts washer this cellular washer is available with various configurations offering not only the ability to wash and dry your parts but also rinsing or part cooling if necessary. The RT-12 accommodates a wide range of part sizes, weights and geometries and will produce up to one part, or table of parts, every 30 seconds depending on the application. The new generation Lean-Jet RT-12 is available with a Siemens PLC and HMI package.

 

Visitors to Cleaning Technologies Group Booth #1321 will be introduced to a number of new products, technologies and services. Among the new technologies exhibited at the show will be: RB-1 G3The New LeanJet® RB-1 Cleaning System uses a patented washing and rinsing process of agitation, spray impingement, hydraulic purging through immersion and rotation, ultrasonics, and heated blow-off drying. The patented "triple action" batch cleaning process was developed specifically to process a broad range of challenging parts, especially those with internal bores and passages and complex geometries, making this system capable of meeting critical cleaning expectations. The new LeanJet RB-1 Gen 3 parts washer also features the latest Siemens programmable controller and operator interface screen. This controls platform boosts system flexibility for automation integration, process control and data logging while offering an intuitive user interface. The new RB-1 has many enhancements for easy maintenance such as larger access doors, larger tank access lids, bolt on air knife and more. The new RB-1 has a small foot print of 4ft. wide x 7ft. deep x 6.6 ft. height.

CTG would like to congratulate all the employees from Ransohoff and Blackstone-NEY Ultrasonics who celebrated a birthday in March.

Ransohoff Ransohoff

 

Blackstone-NEY Ultrasonics Blackstone-NEY Ultrasonics

 

   

Come get a first-hand look at our innovative industrial and precision cleaning technologies and talk to our sales team about your cleaning solutions.  

RB-1 G3The new generation Lean-Jet® RB-1 Gen 3 immersion cleaning system. The New Lean-Jet RB-1 Cleaning System uses a patented washing and rinsing process of agitation, spray impingement, hydraulic purging through immersion and rotation, ultrasonics, and heated blow-off drying. The patented "triple action" batch cleaning process was developed specifically to process a broad range of challenging parts, especially those with internal bores and passages and complex geometries, making this system capable of meeting critical cleaning expectations. The new Lean-Jet RB-1 Gen 3 parts washer also features the latest Siemens programmable controller and operator interface screen. This controls platform boosts system flexibility for automation integration, process control and data logging while offering an intuitive user interface. The new RB-1 has many enhancements for easy maintenance such as larger access doors, larger tank access lids, bolt on air knife and more. The new RB-1 has a small foot print of 4ft. wide x 7ft. deep x 6.6 ft. height.  

CTG would like to congratulate all the employees from Ransohoff who celebrated a birthday in February.   Feb 2014 B Days

Need help choosing the right cleaning equipment for your facility?Contact UsEducation & News